We historically removed the physical regulatory buttons, instead, we creatively bring you the new Joyetech. TAPTECTM technology. Simply tap the panel, then it's all under your control.
Joyetech Cuboid Tap with ProCore Aries kit features a unique touchpad temperature control device with TAPTEC Technology. Powered by two 18650 replaceable batteries, Joyetech Cuboid Tap mod can fire up to 228W max output. Joyetech ProCore Aries atomizer features an innovative flip type top-fill system, allowing to refill with great ease. It utilizes ProC series heads to create a massive vapor production and optimal flavor. Furnished by 1.3 inch OLED screen, Joyetech Cuboid Tap kit features a clock, custom logo, preheat and reverse charging.
1 * CUBOID TAP (no cell)
1 * ProCore Aries atomizer
1 * ProC1 (0.4ohm) head
1 * ProC4 (0.15ohm) head
1 * Spare glass tube
1 * QC USB cable
2 * Manual
1 * Warranty cardbr
2 * Warning card
Colors: silver, black, red, yellow, blue
Weight: 174.5g (with coil, without cell)
Aries capacity: 4.0ml
Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
Applicable heads: ProC series heads
Features: TAPTECTM, pressure-sensitive,
vibration motor, 2A QC, power bank, preheat,
custom logo, real-time clock
Output range: 1-228W
Depth of 510 pins applicable: 4.0-5.5mm
0.05-1.5ohm under Temp/TCR mode
0.1-3.5ohm under Power/Clock mode
Temperature control: 100-315°C/ 200-600°F
Battery using: dual married high-rate 18650 cells
(continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
Thanks to the advanced technology in our time. The CUBOID TAP adopted the pressure-sensitive system inside, with which you can active the menu by clutching the device in sequence.
Power on condition:
3 times to lock/unlock tap buttons
4 times to activate the menu
5 times to turn stealth on/off
Power off condition: 3 times to set TCR value
4 times to turn screen upside down
5 times to check battery voltage
The vibration motor is built in such a way that it is partially off-balanced. Once you tap the panel, it vibrates to indicate that the adjustment is made.
Simply push and pull the top cap to reveal the filling hole then you're free to fill the e-liquid. Simple and convenient.
The CUBOID TAP is powered by dual 18650 high-rate batteries where max output can be reached to 228W. It offers more possibilities when using various coils with its 50A maximum output current.
The bold airflow structure on the ProCore Aries atomizer was designed to deliver massive vapor production without compromising its optimal flavor using with the brand-new ProC series heads.
The ProCore Aries atomizer can be easily detached and is able to wash separately.
Equalizing charge technology was applied in order to bring all cells to an equal state of charge.
The CUBOID TAP adopts the innovative buck-boost technology to provide much steadier output power.
The CUBOID TAP has 2.0A maximum charging current with which it can get fully charged more quickly than normal ones when using the Avatar quick charger (sell separately).
The CUBOID TAP can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector.
The onboard reverse polarity protection protects the device from damage in the event of reverse battery installation.
It applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.
The exquisite spring loaded 510 connector of the CUBOID TAP is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm.Tanks are also free to go up to 25mm diameter as you prefer.
CUBOID TAP comes with the upgradeable firmware. Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.
Please always use married high-rate 18650 cells, don't mix with different brands. The CUBOID TAP adopts new equalizing charge system which supports quick charge capability with max charging current up to 2.0A. You can also take out the cells and charge them in a stand alone charger.